Difference between revisions of "Compressed-air"

From Marspedia
Jump to: navigation, search
 
Line 4: Line 4:
 
Natural [[cave|caves]] and [[lava tube|lava tubes]] are possible locations for compressed air storage. If the walls are lined with an impermeable membrane, the structure of the surrounding rock may be sufficient to contain the pressure. The entrances to the cave or tube are the only areas that need to be strengthened.  Compressed air storage can be about 35-40% efficient in the best conditions.   
 
Natural [[cave|caves]] and [[lava tube|lava tubes]] are possible locations for compressed air storage. If the walls are lined with an impermeable membrane, the structure of the surrounding rock may be sufficient to contain the pressure. The entrances to the cave or tube are the only areas that need to be strengthened.  Compressed air storage can be about 35-40% efficient in the best conditions.   
  
== Adiabatic compression ==
+
==Adiabatic compression==
Some forms of adiabatic compressed air storage might reach about 70%.<ref>https://backend.orbit.dtu.dk/ws/portalfiles/portal/6324034/prod21323243995265.ecos2011_paper%5B1%5D.pdf</ref>  This would reuire extensive heat exchangers and tanks. These would probably need to be produced in-situ to be cost effective.
+
Some forms of adiabatic compressed air storage might reach about 70%.<ref>https://backend.orbit.dtu.dk/ws/portalfiles/portal/6324034/prod21323243995265.ecos2011_paper%5B1%5D.pdf</ref>  This would require extensive heat exchangers and tanks. These would probably need to be produced in-situ to be cost effective.
  
 
==Condensation==
 
==Condensation==
Methods to manage [[condensation]] must be included in any design, and may even be integrated into [[in-situ resource utilization|ISRU]] plans.
+
Methods to manage [[condensation]] must be included in any design, and may even be integrated into [[in-situ resource utilization|ISRU]] plans. the most common form of condensation control is gravity separation, with valves controlled to drain the condensate as it accumulates, but without wasting the compressed air
  
 
[[Category:Storage]]
 
[[Category:Storage]]

Latest revision as of 19:55, 25 December 2019

Compressed-air is a versatile commodity for energy storage and automation. Compressed air is a vital part of pneumatic systems.

Storage in Caves

Natural caves and lava tubes are possible locations for compressed air storage. If the walls are lined with an impermeable membrane, the structure of the surrounding rock may be sufficient to contain the pressure. The entrances to the cave or tube are the only areas that need to be strengthened. Compressed air storage can be about 35-40% efficient in the best conditions.

Adiabatic compression

Some forms of adiabatic compressed air storage might reach about 70%.[1] This would require extensive heat exchangers and tanks. These would probably need to be produced in-situ to be cost effective.

Condensation

Methods to manage condensation must be included in any design, and may even be integrated into ISRU plans. the most common form of condensation control is gravity separation, with valves controlled to drain the condensate as it accumulates, but without wasting the compressed air


References