Difference between revisions of "Mining"

From Marspedia
Jump to: navigation, search
(Room and Pillar Mining)
(Undo revision 8470 by 67.125.30.153 (Talk))
Line 19: Line 19:
 
Vertical shafts are used in shaft mining.
 
Vertical shafts are used in shaft mining.
  
My first step was making a great big giant caneadlr and taping it to the wall above my iMac. Because I forget everything, and I can't keep track of time. Somehow since I started freelancing full time my productivity went down the drain, because I no longer have a tight time frame to make it work. Turns out I needed the structure and the pressure of juggling several jobs at once. I just procrastinate otherwise. So, caneadlr to write down everything in  is my first step. Step number two  writing a daily schedule. It's List Time!
+
===Room and Pillar Mining===
 +
In this method, large galleries are dug into the ore. Pillars of ore are left at regular intervals to support the celing. After all the ore has been removed, these pillars may be removed through retreat mining, leading to the collapse of the chamber. This collapse may lead to surface subsidence.
  
 
===Longwall Mining===
 
===Longwall Mining===

Revision as of 06:20, 9 March 2013

Mining is the process of fetching natural raw material from below the Martian surface for further processing. The fetched raw materials are frozen water, minerals and ore.

Technology

Mining is an energy consuming job. Due to the thin atmosphere the digging machines are supposed to work automated or remote controlled.

Surface Mining Methods

Strip Mining

When resources are available close to the surface, a strip mine is the most efficient method of extraction. The layers of regolith covering the resource are taken away, and the exposed ore is mined. This method is also called open-pit mining.

Subsurface Mining Methods

When the natural resource lies far underground, it is far more efficient to dig tunnels to access the ore than to remove the overlaying rock and regolith. Since Mars has only about 38% as much gravity as Earth[1] people should be able to extend mines to a depth about 2.6 times as deep as on earth without the tunnel collapsing from hydrostatic pressure. This should allow the search for valuable minerals to a depth of more than 5 miles. There are many subsurface mining methods, and they are often used in conjunction with each other.

Drift Mines

Drift mining consists of primarily horizontal tunnels. These are most often dug into a hillside.

Slope Mining

Slope mining uses diagonal tunnels to access ore.

Shaft Mining

Vertical shafts are used in shaft mining.

Room and Pillar Mining

In this method, large galleries are dug into the ore. Pillars of ore are left at regular intervals to support the celing. After all the ore has been removed, these pillars may be removed through retreat mining, leading to the collapse of the chamber. This collapse may lead to surface subsidence.

Longwall Mining

Longwall mining begins with a long horizontal shaft. The roof is held up mechanically by moveable supports. One side of the shaft is mined along its entire length. As this mine progresses, the mechanical supports move foreward with the face. The old area of the mine is left unsupported, and allowed to collapse under its own weight, often leading to surface subsidence.

Emerging galleries

The artificial caves are a nice side effect. They can be used to expand the settlement with storage rooms, living rooms, underground greenhouses, gas container for energy storage or storage of chemicals.

Reference

  1. McGRAW-HILL ENCYCLOPEDIA OF Science & Technology, 8 th edition, vol. 10 (c) 1997 page 527