Difference between revisions of "Dust collector"

From Marspedia
Jump to: navigation, search
Line 6: Line 6:
  
 
Dust collectors are filtration systems.  For effective filtration of small particles they will often operate in cascade fashion, with a pre-filter and secondary filters.
 
Dust collectors are filtration systems.  For effective filtration of small particles they will often operate in cascade fashion, with a pre-filter and secondary filters.
HEPA grade filters can filter down to 5 microns, removing bacteria.  However they have no effect on gases, only dust and particulate matter.
+
 
 +
HEPA grade filters can filter down to 5 microns, removing bacteria.  However they have no effect on gases, only dust and particulate matter.<ref>https://www.hou.usra.edu/meetings/marsdust2017/pdf/6016.pdf</ref>
 +
 
 +
Electrostatic precipitators<ref>https://iopscience.iop.org/article/10.1088/1742-6596/327/1/012048/pdf</ref> might be more effective than filters in removing the fine particulates in the martian atmosphere, and a par of most proposals.
 +
 
 +
Dust collectors might be used in a number of cases:
 +
 
 +
* Extraction of in situ resources from the martian atmosphere.
 +
* Cabin filtration in vehicles.
 +
* Airlock pump down systems.
 +
* Interior air filtration of a settlement.
 +
* Interior air filtration of settlement production facilities.
 +
 
 +
The background (average) dust loading of Mars is estimated at 9 e-9 kg/m3<ref>https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1029/1999GL008341</ref> and at 1,8e-7<ref>https://pdfs.semanticscholar.org/418a/88f31b87f3d615a1f6116d31a078cfde8802.pdf</ref>
 +
 
 +
== References ==

Revision as of 17:32, 16 July 2019

A highly speculative image of an array of dust collectors feeding atmospheric compressors on Mars. Sized for 50 m3/s of martian air, or about 1 kg/s.

A dust collector is a device used to separate dust from air. In some cases clean air is the desired result, in others, the dust is the object of interest.

Most dust collectors operate below atmospheric pressure with the fan on the clean side, after the dust separation system. In the thin martian atmosphere, the available pressure is very low, much lower than the standard operating pressure of dust collectors. So the fan might be required to be put on the dusty side, before the filters.

Dust collectors are filtration systems. For effective filtration of small particles they will often operate in cascade fashion, with a pre-filter and secondary filters.

HEPA grade filters can filter down to 5 microns, removing bacteria. However they have no effect on gases, only dust and particulate matter.[1]

Electrostatic precipitators[2] might be more effective than filters in removing the fine particulates in the martian atmosphere, and a par of most proposals.

Dust collectors might be used in a number of cases:

  • Extraction of in situ resources from the martian atmosphere.
  • Cabin filtration in vehicles.
  • Airlock pump down systems.
  • Interior air filtration of a settlement.
  • Interior air filtration of settlement production facilities.

The background (average) dust loading of Mars is estimated at 9 e-9 kg/m3[3] and at 1,8e-7[4]

References