Difference between revisions of "InSight Mission"

From Marspedia
Jump to: navigation, search
Line 19: Line 19:
 
==Mission Activities==
 
==Mission Activities==
  
On February 13, 2019 NASA announced that the InSight lander has placed its second instrument on the Martian surface. New images confirm that the Heat Flow and Physical Properties Package, or HP3, was successfully deployed on Feb. 12 about 3 feet (1 meter) from InSight's seismometer.  HP3 measures heat moving through Mars' subsurface.
+
On February 13, 2019, NASA announced that the InSight lander has placed its second instrument on the Martian surface. New images confirm that the Heat Flow and Physical Properties Package, or HP3, was successfully deployed on Feb. 12 about 3 feet (1 meter) from InSight's seismometer.  HP3 measures heat moving through Mars' subsurface.
 
Equipped with a self-hammering spike, mole, the instrument will burrow up to 16 feet (5 meters) below the surface, deeper than any previous mission to the Red Planet. This compares to, the Viking 1 lander which went down 8.6 inches (22 centimeters). While the Phoenix lander dug down 7 inches (18 centimeters).
 
Equipped with a self-hammering spike, mole, the instrument will burrow up to 16 feet (5 meters) below the surface, deeper than any previous mission to the Red Planet. This compares to, the Viking 1 lander which went down 8.6 inches (22 centimeters). While the Phoenix lander dug down 7 inches (18 centimeters).
"We're looking forward to breaking some records on Mars," said HP3 Principal Investigator Tilman Spohn of the German Aerospace Center (DLR), which provided the heat probe for the InSight mission. "Within a few days, we'll finally break ground using a part of our instrument we call the mole."
+
 
 
HP3 looks a bit like an automobile jack but with a vertical metal tube up front to hold the 16-inch-long (40-centimeter-long) mole. A tether connects HP3's support structure to the lander, while a tether attached to the top of the mole features heat sensors to measure the temperature of the Martian subsurface. Meanwhile, heat sensors in the mole itself will measure the soil's thermal conductivity, that is how easily heat moves through the subsurface.  
 
HP3 looks a bit like an automobile jack but with a vertical metal tube up front to hold the 16-inch-long (40-centimeter-long) mole. A tether connects HP3's support structure to the lander, while a tether attached to the top of the mole features heat sensors to measure the temperature of the Martian subsurface. Meanwhile, heat sensors in the mole itself will measure the soil's thermal conductivity, that is how easily heat moves through the subsurface.  
  

Revision as of 10:24, 15 February 2019

NASA’s Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) made a soft landing as planned on November 26, 2018. It is the first space robotic explorer to study the inside of Mars: its crust, mantle, and core. It set down at exactly 2:52:59 p.m. EST. We found out about the landing by way of two small experimental Mars Cube One (MarCO) CubeSats. They were launched on the same rocket as InSight and relayed information from the lander. [1] The launch took place with an Atlas V-401 from Vandenberg Air Force Base, California on May 5, 2018 7:05 a.m. ET. It’s main instruments are a seismometer (SEIS), a heat probe, and a radio science instrument (RISE).[2]

Insight lander

Artist’s conception of Insight lander sitting on Mars with instruments deployed

Location of Insight

The red dot shows where InSight landed. It landed just about in the center of its landing ellipse. The location is in the Elysium quadrangle at about 4.5 N and 135.6 E (224.4 W).

Spacecraft

InSight weighs 794 pounds (360 kilograms). It is 19 feet 8 inches (6 meters) with solar panels deployed ("wingspan"), and its deck is 5 feet 1 inch (1.56 meters) in diameter.[3]

InSight sitting on the surface, as seen by HiRISE


Mission Activities

On February 13, 2019, NASA announced that the InSight lander has placed its second instrument on the Martian surface. New images confirm that the Heat Flow and Physical Properties Package, or HP3, was successfully deployed on Feb. 12 about 3 feet (1 meter) from InSight's seismometer. HP3 measures heat moving through Mars' subsurface. Equipped with a self-hammering spike, mole, the instrument will burrow up to 16 feet (5 meters) below the surface, deeper than any previous mission to the Red Planet. This compares to, the Viking 1 lander which went down 8.6 inches (22 centimeters). While the Phoenix lander dug down 7 inches (18 centimeters).

HP3 looks a bit like an automobile jack but with a vertical metal tube up front to hold the 16-inch-long (40-centimeter-long) mole. A tether connects HP3's support structure to the lander, while a tether attached to the top of the mole features heat sensors to measure the temperature of the Martian subsurface. Meanwhile, heat sensors in the mole itself will measure the soil's thermal conductivity, that is how easily heat moves through the subsurface.

The mole will stop every 19 inches (50 centimeters) to take a thermal conductivity measurement of the soil. Because hammering creates friction and releases heat, the mole is first allowed to cool down for a good two days. Then it will be heated up by about 50 degrees Fahrenheit (10 degrees Celsius) over 24 hours. Temperature sensors within the mole measure how rapidly this happens, which tells scientists the conductivity of the soil. If the mole encounters a large rock before reaching at least 10 feet (3 meters) down, the team will need a full Martian year (two Earth years) to filter noise out of their data. This is one reason the team carefully selected a landing site with few rocks and why it spent weeks picking where to place the instrument.[4]

References

See Also

Recommended reading

External links