Compression

Adiabatic compression

Compression power equation

When the compression is small, we can get away with the following simple equation:

1) W=(Q*dp)/n

Where:

W= compressor power (kW)

dp=pressure change (kPa)

Q=flow (m3/s)

n=compressor efficiency (usually between 0.6 and 0.8)

But when the compression becomes significant, we need to take into account the work done in compressing the gas.  The equation for adiabatic compression (no heat loss at the compressor) is still not exact, but it is OK for settlement design.

5)  W=(y/y-1)*[(Q*R*T)/(w*n)]*[(P₂/P₁)^(y-1/y)-1]

Where:

W= power (Watts),

y= Heat capacity ratio of the working fluid = 1.67 for noble gases = 1.41 for other gases, including air

Q= mass flow (kg/s)

R= Ideal gas constant = 8.314 J/kg mole

T= Absolute gas temperature before the compressor (K)

w= Molecular weight of the gas (g/mole)

n= Efficiency

P₂= Absolute gas pressure after the compressor (kPa)

P₁= Absolute gas pressure before the compressor(kPa)

Gas	molecular weight
Hydrogen (H2)	2
Deuterium (D2)	4
Helium	4
Nitrogen (N2)	28
Air	28.9
Oxygen (O2)	32
CO2	44
Fluorine (F2)	38
Argon	40
Neon	20

Table 1, gas molecular weight, many gases are diatomic in their natural state