Difference between revisions of "Indirect reduction of steel"
ChristiaanK (talk | contribs) (Created page) |
ChristiaanK (talk | contribs) (Added older method) |
||
| Line 4: | Line 4: | ||
==Process overview== | ==Process overview== | ||
| − | Pig iron (which is high-carbon iron similar to [[cast iron]], but not intended as a final product) is produced in a blast furnace and then has excess carbon removed in an oxygen furnace. | + | '''Pig iron''' (which is high-carbon iron similar to [[cast iron]], but not intended as a final product) is produced in a blast furnace and then has excess carbon removed in an oxygen furnace. |
| − | Oxygen is blown into the molten pig iron at supersonic speeds, where it burns with carbon (a stronger reducing agent than iron) to produce carbon dioxide gas (which escapes) and heat. The reaction is highly energetic and serves to agitate the molten metal (mixing it) and also heats it (molten pig iron comes out of the blast furnace at less then the melting point of steel). The Bessemer converter, the original 19th century oxygen furnace, had a lining of acidic materials. The modern furnace is known as the basic oxygen furnace, due to its basic lining. | + | Oxygen is blown into the molten pig iron at supersonic speeds, where it burns with carbon (a stronger reducing agent than iron) to produce [[carbon dioxide]] gas (which escapes) and heat. The reaction is highly energetic and serves to agitate the molten metal (mixing it) and also heats it (molten pig iron comes out of the blast furnace at less then the melting point of steel). The '''Bessemer converter''', the original 19th century oxygen furnace, had a lining of acidic materials. The modern furnace is known as the '''basic oxygen furnace''', due to its basic lining. |
After the composition is further fine-tuned, the steel can be cast into various shapes. | After the composition is further fine-tuned, the steel can be cast into various shapes. | ||
| + | |||
| + | ==Alternative process== | ||
| + | Steel can also be produced from [[wrought iron]] or other low-carbon iron. If the iron is alternately heated in a furnace burning [[charcoal]] or [[coke]] (or [[graphite]], [[diamond]] or other high-purity forms of [[carbon]], though this does not make economic sense) and the slag expelled by hammering, the iron will eventually absorb enough carbon to become steel. This is the pre-industrial method and is known as '''steeling'''.<ref name=Sims>L. Sims - ''The backyard blacksmith: Traditional techniques for the modern smith'' 2006. ISBN 978-0-7858-2567-8 p. 46</ref> | ||
| + | |||
| + | The wrought iron for this process would itself have been converted from pig iron (see [[wrought iron]] for details), making it a three-step process of adding carbon, removing carbon and then adding carbon again. | ||
==Comparison with direct reduction== | ==Comparison with direct reduction== | ||
| Line 18: | Line 23: | ||
**Uses more energy overall. | **Uses more energy overall. | ||
**Using hydrogen gas as the main reducing agent inherently implies direct reduction. | **Using hydrogen gas as the main reducing agent inherently implies direct reduction. | ||
| + | |||
| + | ==References== | ||
| + | <references /> | ||
[[Category:Industry]] | [[Category:Industry]] | ||
| + | [[Category:Metallurgy]] | ||
Revision as of 03:24, 17 February 2013
Indirect reduction is the production of steel from iron ore in two steps: first adding carbon, then removing carbon.
Note: Numerous details have been left out for the sake of clarity. The information below is not sufficient for the production of high-quality metal.
Process overview
Pig iron (which is high-carbon iron similar to cast iron, but not intended as a final product) is produced in a blast furnace and then has excess carbon removed in an oxygen furnace.
Oxygen is blown into the molten pig iron at supersonic speeds, where it burns with carbon (a stronger reducing agent than iron) to produce carbon dioxide gas (which escapes) and heat. The reaction is highly energetic and serves to agitate the molten metal (mixing it) and also heats it (molten pig iron comes out of the blast furnace at less then the melting point of steel). The Bessemer converter, the original 19th century oxygen furnace, had a lining of acidic materials. The modern furnace is known as the basic oxygen furnace, due to its basic lining.
After the composition is further fine-tuned, the steel can be cast into various shapes.
Alternative process
Steel can also be produced from wrought iron or other low-carbon iron. If the iron is alternately heated in a furnace burning charcoal or coke (or graphite, diamond or other high-purity forms of carbon, though this does not make economic sense) and the slag expelled by hammering, the iron will eventually absorb enough carbon to become steel. This is the pre-industrial method and is known as steeling.[1]
The wrought iron for this process would itself have been converted from pig iron (see wrought iron for details), making it a three-step process of adding carbon, removing carbon and then adding carbon again.
Comparison with direct reduction
- Advantages
- Simpler, provided that large quantities of carbon and oxygen are available.
- Requires less electricity (when compared to melting directly reduced iron with an electric arc furnace).
- There is a reduced risk of hydrogen fracturing when compared to direct reduction by hydrogen gas.
- Disadvantages
- Uses more energy overall.
- Using hydrogen gas as the main reducing agent inherently implies direct reduction.
References
- ↑ L. Sims - The backyard blacksmith: Traditional techniques for the modern smith 2006. ISBN 978-0-7858-2567-8 p. 46
