Difference between revisions of "Electric cable"
| Line 5: | Line 5: | ||
*The insulation must be [[fire]]-proof if used inside a [[habitat]]. | *The insulation must be [[fire]]-proof if used inside a [[habitat]]. | ||
| − | == Conductors == | + | ==Conductors== |
| − | Most high voltage and high amperage conductors are aluminium, while copper is usually used in domestic distribution and communications. Both metals are recyclable. Conductors are temperature limited, and conductivity decreases with temperature. | + | Most high voltage and high amperage conductors are aluminium, while copper is usually used in domestic distribution and communications. Both metals are recyclable. Conductors are temperature limited, and conductivity decreases with temperature. |
| + | |||
| + | In a conductor, V=R*I where the voltage drop (V) is equal to the electrical resistance (R) * the current (I). | ||
| + | |||
| + | Power =Voltage * current, or W=V*I, or W=RI<sup>2</sup>, or W=V<sup>2</sup>/R. | ||
| + | |||
| + | Conductors are described by the American Wire gage system, from 24 to 0000, and then in the MCM (thouthands of circular mils) system from 250 to 2000. The system has many particular dimensions, such as 477 Aluminium wire, that is 477 MCM and used as its conductivity is equal to the older 300 MCM copper conductors it often replaces. | ||
==Insulation== | ==Insulation== | ||
Glass fabric made from [[fiberglass]] is an interesting material for cable insulation, for it meets all above-mentioned requirements. See also [[lunarp:In Situ Electrical Insulation]]. | Glass fabric made from [[fiberglass]] is an interesting material for cable insulation, for it meets all above-mentioned requirements. See also [[lunarp:In Situ Electrical Insulation]]. | ||
| + | |||
| + | [[Polymer|PVC]] (poly vinyl chloride) could be manufactured on Mars | ||
==Open Issues== | ==Open Issues== | ||
Revision as of 12:36, 10 July 2019
Electric cables, also called conductors, insulated conductors and wiring, are used for the transmission of electrical power, grounding and communications. For a Martian settlement the following requirements apply:
- It should be recyclable.
- It should be made in-situ from local resources.
- The insulation must be fire-proof if used inside a habitat.
Conductors
Most high voltage and high amperage conductors are aluminium, while copper is usually used in domestic distribution and communications. Both metals are recyclable. Conductors are temperature limited, and conductivity decreases with temperature.
In a conductor, V=R*I where the voltage drop (V) is equal to the electrical resistance (R) * the current (I).
Power =Voltage * current, or W=V*I, or W=RI2, or W=V2/R.
Conductors are described by the American Wire gage system, from 24 to 0000, and then in the MCM (thouthands of circular mils) system from 250 to 2000. The system has many particular dimensions, such as 477 Aluminium wire, that is 477 MCM and used as its conductivity is equal to the older 300 MCM copper conductors it often replaces.
Insulation
Glass fabric made from fiberglass is an interesting material for cable insulation, for it meets all above-mentioned requirements. See also lunarp:In Situ Electrical Insulation.
PVC (poly vinyl chloride) could be manufactured on Mars
Open Issues
- What conductive material can be produced in-situ with the lowest effort?
- Outdoor cables need special protection against static electricity. Preventive measures, shielding and protective circuits must be defined.
| This article is a stub. You can help Marspedia by expanding it. |
