Difference between revisions of "Fail-safe"
m (minor spelling) |
PeterBrett (talk | contribs) (Better intro.) |
||
| Line 1: | Line 1: | ||
| − | + | Due to the hostile [[environmental conditions]] on [[Mars]], human visitors to the planet would have to rely heavily on artificial environments in order to survive. Their [[habitat]]s' [[life support]] equipment must therefore run 100% reliably. This article describes the principles of '''fail-safe''' engineering. | |
| + | |||
| + | The basic premise of fail-safe behaviour is to ensure that if a system or subsystem fails, it should do so in a "safe" manner; that is, no single failure should be able to place those who use or maintain it in danger. | ||
==Redundancy== | ==Redundancy== | ||
Revision as of 13:26, 16 November 2007
Due to the hostile environmental conditions on Mars, human visitors to the planet would have to rely heavily on artificial environments in order to survive. Their habitats' life support equipment must therefore run 100% reliably. This article describes the principles of fail-safe engineering.
The basic premise of fail-safe behaviour is to ensure that if a system or subsystem fails, it should do so in a "safe" manner; that is, no single failure should be able to place those who use or maintain it in danger.
Redundancy
Every system is built twice or more, where each can work independent from the other. The capacity of each system is big enough to support the full service in case of failure of one system. In normal operation both systems are running in parallel with half load. This principle provides the best reliability for the whole function.
Example: The number and size of solar panels is at least twice as big as actually needed for vital system operation. In normal operation mode the surplus energy can be used for additional convenience.
Mesh
Services must be available independent from the failure location.
Example: If building A and building B have their own air supply system then People in building A can get air from building B in case of a failure in the air supply system of their own building.
Backup systems
A standby system is automatically powered up, or can be manually brought into operation shortly. Advantage: The system is not subject to full maintenance effort during standby mode. Risk: If not checked in regular intervals the backup system may not be able to work if needed.
