Difference between revisions of "Atmospheric processing"
Line 12: | Line 12: | ||
condensate. There will be more carbon dioxide than is needed for industrial purposes so some of it will be expanded to help power the compressors and to cool the incoming gas. Then excess CO<sub>2</sub> will be discharged. | condensate. There will be more carbon dioxide than is needed for industrial purposes so some of it will be expanded to help power the compressors and to cool the incoming gas. Then excess CO<sub>2</sub> will be discharged. | ||
− | == | + | ==Results== |
===Dust=== | ===Dust=== | ||
− | The Martian [[atmosphere]] contains variable amounts of [[dust]], which consists of similar [[minerals]] like [[regolith]]. Electrostatic filters or other technologies will be used to remove the dust. | + | The Martian [[atmosphere]] contains variable amounts of [[dust]], which consists of similar [[minerals]] like [[regolith]]. Electrostatic filters or other technologies will be used to remove the dust to prevent it from damaging the equipment. |
+ | |||
+ | ===Carbon Dioxide=== | ||
+ | [[Carbon dioxide]] is the main part of the Martian atmosphere with 96 %. It can be used for the [[hydrocarbon synthesis]], including the production of [[methane]] based [[fuel]]. | ||
===Water=== | ===Water=== | ||
The 0.03 % [[water]] vapor (H2O) is equivalent to about 10 % air humidity after adiabatic compression and cooling to around 1°C. A device similar to an air dehumidifier can be used to extract this water. | The 0.03 % [[water]] vapor (H2O) is equivalent to about 10 % air humidity after adiabatic compression and cooling to around 1°C. A device similar to an air dehumidifier can be used to extract this water. | ||
− | === | + | ===Nitrogen=== |
− | [[ | + | The balance of the remaining gas after carbon dioxide condensation contains mostly [[nitrogen]] and [[argon]]. This mixture can serve as a buffer for oxygen to produce a breathable atmosphere. remaining traces of Carbon monoxide must be catalytically removed if the gas is to be used for the settlement atmosphere. |
− | + | Nitrogen can be used to create ammonia and nitrates in fertilizer and as nitric acid in industry. | |
− | |||
− | + | === Argon === | |
+ | Argon is useful for industrial processes that must be performed in an inert atmosphere, as is Argon. | ||
==See also== | ==See also== |
Revision as of 17:50, 16 April 2019
Atmospheric processing describes the extraction of substances out of the Martian atmosphere and the usage as raw material for further processing. Unlike surface and sub-surface mining, the atmospheric mining does not require the movement of large amounts of regolith or rock with heavy machinery, nor is expensive transport per rover or railroad necessary. The atmosphere can simply be sucked in through a pipe at every location, and the processing is done inside of buildings. Also, the maintenance of all the mining machinery is in-house, which is a major safety advantage.
Contents
Collection of Atmosphere
A compressor collects Martian air while filters remove atmospheric dust.The gas is compressed to the pressure where it can be liquefied by cooling (condensation) and removed. Further cooling condenses the other atmospheric gases for various processes.
Process
Compression
Compression above 5,19 bar (520 kPa) allows to liquefy carbon dioxide.
Condensation
The atmosphere is cooled to remove water vapor as a condensate. As the gas continues to cool most of the rest of the water vapor is removed as frost. The dry gas is cooled further to remove carbon dioxide condensate. There will be more carbon dioxide than is needed for industrial purposes so some of it will be expanded to help power the compressors and to cool the incoming gas. Then excess CO2 will be discharged.
Results
Dust
The Martian atmosphere contains variable amounts of dust, which consists of similar minerals like regolith. Electrostatic filters or other technologies will be used to remove the dust to prevent it from damaging the equipment.
Carbon Dioxide
Carbon dioxide is the main part of the Martian atmosphere with 96 %. It can be used for the hydrocarbon synthesis, including the production of methane based fuel.
Water
The 0.03 % water vapor (H2O) is equivalent to about 10 % air humidity after adiabatic compression and cooling to around 1°C. A device similar to an air dehumidifier can be used to extract this water.
Nitrogen
The balance of the remaining gas after carbon dioxide condensation contains mostly nitrogen and argon. This mixture can serve as a buffer for oxygen to produce a breathable atmosphere. remaining traces of Carbon monoxide must be catalytically removed if the gas is to be used for the settlement atmosphere.
Nitrogen can be used to create ammonia and nitrates in fertilizer and as nitric acid in industry.
Argon
Argon is useful for industrial processes that must be performed in an inert atmosphere, as is Argon.